Loctite 542 - 250ml - Hydraulic Thread Sealant for Fine ThreadsLoctite 542 is a medium strength, thread sealant, designed for locking and sealing fine metal threads used in hydraulic, pneumatic and general fittings. This sealant is resistant to fuel, oil, coolants and hydraulic fluids. Loctite 542 Hydraulic Thread Sealant for Fine Threads 250ml Brand Type Size Material Safety & Technical Data Sheets Material Safety Data Sheet: Technical Data Sheet:

This 6410 SKF bearing is a Open Type Deep Groove Radial Ball Bearing with a standard radial internal clearance The bearing's dimensions are 50x130x31

a guided inner ring

this bearing is a universal fit single bearing with a medium preload and a P3 precision rating

Light Series 35mm - Bore Size Double Row without Filling Slots Metal Shields On Both Sides Glass Fibre Reinforced PA66 Cage (Polyamide Cage) Normal Internal Clearance Grease with a lithium thickener of consistency 3 to the NLGI Scale for a temperature range –30 to +120 °C

32 10 NR J C3 Light Series 50mm - Bore Size 32° Contact Angle with Filling Slot Snap Ring Groove with Snap Ring Steel Cage Internal Clearance Greater than Normal

This GEZ 304 ES 2RS bearing is a imperial steel/steel spherical plain bearing with a rubber seal on both sides of the bearing and a standard radial internal clearance

CF 3 F WB UU R Standard Type Size Stainless Steel Cage Type Thrust Disk Type with Hexagon Socket Sealed Type Crowned Outer Ring

The bearing's dimensions are Inside Diameter 3 3/8

62 03 NR Light Series 17mm - Bore Size Open Type Normal Radial Internal Clearance Snap ring groove in the outer ring

CR 20 V B UU R Inch Series Size High Carbon Steel Full Complement Type Hexagon Socket Sealed Type Crowned Outer Ring

79 05 A5TR DU L P3 Series - NSK - Ultra Light Bore Size - 25mm 25 Degree Contact Angle Duplex Universal Light Preload Precision Rating

The bearing's dimensions are 55x120x20