ER-Precision collet chuck BT 40 - 2/20 - 100 | ER 32Application: For mounting straight shank tools in 2 m collets. Advantage: Excellent concentricity in the system (chuck + collet + clamping nut) 3 m radial run out with a 2 m clamping nut, 6 m radial run out with a 5 m clamping nut Extremely strong holding force (increases the holding power by at least 60% compared to standard ER chuck) Plain clamping nut without grooves for high speed machining

Delivered with a built-in screw for shortened taper tools

In the tailstock of the lathe so that no friction between the workpiece and the tip occurs

Inklusive Feder

for KEMMLER precision collet chuck ER

- Repeating accuracy 0

The caliper will be ready for measurements as soon as it is switched on with the LCD screen displaying the actual slider position

Entfernung zwischen geöffneten Flügeln und Spähnen: 100~150 mm

For all solid drills with cylindrical shank according to DIN 6595

bei Ø 6 – Ø 32 mm = h236

Measuring surfaces allow for the measurement of external diameters

Adapters HSK / PSK with axial clamping

bei Ø 6 – Ø 32 mm = h232